+86 13720145047
lunagangrui@gmail.com
Product Parameter
name | Live cable identification meter, cable identification meter, high voltage cable identification meter, 10kV cable identification meter, 35kV cable identification meter, buried cable identification meter |
Identification of the cable | High voltage cable identification, low voltage cable identification |
mode | Live cable identification and no-live cable identification |
Power supply | DC supply |
Level | High voltage(10KV cable,35KV cable),low voltage(200V cable,380V cable, long distance conductor) |
The identification accuracy | 100% |
clamp | φ120mm,Applicable to all kinds of (high voltage, low voltage, single core, multi-core) cable (live or power failure) identification work |
transmitter | Output signal:output four kind of frequency: 815Hz,8kHz,33KHz,83 KHz |
Output power:Constant power output, low, medium and high, max 15w | |
Output mode:Coupling induction type, direct input type | |
Impedance display:with 100000 Ohm | |
display:LCD with backlight | |
power: standard 1# 1.2Vcharge battery 6 joints, Standby time is over 8h, Electricity prompt | |
Over-heat, over-current:auto protection | |
Working temperature:-20℃-50℃ | |
receiver | Receiver frequency: receive 5 frequency: 815Hz,8kHz,33KHz,83 KHz,50Hz |
Receiving mode: coupling clamp | |
Signal interface: digital, grating and sound interface simultaneously indicate signal strength | |
display: LCD with backlight | |
adjustment: manual, range 000--100db | |
Detecting length: connect cable directly, longest 15KM. when coupled cable, Primary coupling measures 3Km, Multiple coupling is infinitely far away. | |
Power :standard 5#1.2Vcharge batter 6,charge-discharge 500times.standby time:over 12h | |
Over-heat, over-current:auto protection | |
Working temperature:-20℃-40℃ | |
Clamp open | Inner diameter when closed≥125mm |
Power | 1.0KVA(Intermittent instantaneous) |
Identification way | Judge by the direction of the pointer swing |
weight | 5.8kg |
Size | 30*30*18cm |
Product Feature And Application
1. Identification accuracy. The clamps are suitable for all kinds of cables. The operation is very simple and the instructions are clear and intuitive. Portable, beautiful, good feel, reliable operation of the whole machine is not short circuit, power output frequency adjustable, receiver sensitivity adjustable;
2. Live cable identification and power failure cable identification
3. The online identification of the running state of the cable greatly improves work efficiency and reduces the economic loss caused by power failure. There is no need to disconnect both ends of the running cable from the power distribution equipment, which ensures the normal operation of the electrical equipment;
4. With the indirect coupling mode, there is no electrical contact between the operator and the cable, which ensures the operator's safety to a great extent.
5. DC power supply, standby time of each charge is more than 8 hours, it is very convenient to use on-site;
6. clamp open ф120 Suitable for all kinds of sectional area cable identification;
7. Digital, grating, sound three interfaces at the same time prompt signal strength, recognition intuitive;
Accessory
No | Item name | Quantity |
1 | power source | 1 |
2 | handheld receiver | 1 |
3 | Live cable signal transmitter plier | 1 |
4 | Receiving plier(detection plier) | 1 |
5 | Power cable | 1 |
6 | Φ5×20 4A fuse | 2 |
7 | Manual | 1 |
8 | Inspection report | 1 |