1000A Primary Current Injection Test Set

Product Parameter

1. Name: 1000A Primary Current Injection Test Set

2. Environmental groups: belong to GB6587.1-86 in the "electronic measuring instrument test master plan" Ⅲ group (can be used in an outdoor environment) instrument.

3. Input ac 50Hz, 220V./60Hz, 110V

4. Output single-phase 0-1000a AC current; The current can be adjusted smoothly and continuously, with an accuracy higher than 0.2.

The output current is the standard sine wave with a small burr, which is better than the standard of power system requirements, ripple system  

The number is less than 0.3%.

5. Output current mode: true RMS value is continuously adjustable;

6. Output waveform: standard sine wave;

7. Current accuracy: each current can be adjusted smoothly, steadily, and continuously, with an accuracy higher than 0.5.

8. Current stability: 0.1%;

Product Feature And Application

1. Output 0 ~ 1000A current

2. The operation time of the test equipment can be synchronized

3. Automatic identification of normally open and normally closed contacts

4. Can be several serial checks at the same time, improve work efficiency, and directly display the test values of primary current and secondary current for the convenience of test observation and recording.

5. The performance characteristics of a six-and-a-half display, the national initiative six-and-a-half display, display accuracy is higher, and more accurate experimental results

6. Large LCD, displays data more intuitively, faster reading

7. The meter display locking function, especially for the transformer, can be more accurate and faster than the test

8. Use the beautiful and generous PVC panel, and  make the panel more resistant to dirt and wear

9. The measurement accuracy is 0.1 grade higher.

10. Large power, small size, with a strong load capacity

11. Small size, lightweight, volume of similar products is only 30% ~ 70%, very convenient to carry.

Accessory